Skip to main content

Simple Ways to Clean Your Motorcycle Gloves and Boots


Like the motorcycle helmet and garments maintenance, cleaning will improve the longevity and performance of your favorite motorcycle gloves and boots as well. By the way, the cleaning processes are much simple than you think, just to take note on several precautions.


Motorcycle Gloves Cleaning




  1. Read the manufacturer label for special care instructions.
  2. Handwash with lukewarm water and baby shampoo.
  3. Rinse with clean water.
  4. Wrap-in a dry towel or clothes, gently squeeze from the fingertips then downwards. DON’T wring or knead, AVOID drying by direct sunlight or dryer.
  5.  Air dry, for leather gloves will take long hours to dry, wear and make a fist a few times before it is completely dry.


Motorcycle Boots Cleaning





  1. Read the manufacturer label for special care instructions.
  2. Remove the shoe laces and insoles.
  3. Wash with lukewarm water and baby shampoo.
  4. For cleaning stains, textile can use sponge; leather can use soft brush (toothbrush).
  5. Wipe the boots interior and exterior using a dry towel / clothes.
  6. Stuff the shoes with newspaper and air dry it.

2
Cleaning your own stuffs will not only extend your love to your favorite gloves and boots, but will let you understand and appreciate your gear more than ever.





This Content is Sponsored by DC Biker

Check out our website for our full range of products           https://dcbiker.ecwid.com

Or Find Out our latest news at our FB Page                         https://www.facebook.com/dcbikermalaysia

Comments

  1. Really nice information thanks for sharing very useful ............... For more visit riding boots online

    ReplyDelete

Post a Comment

Popular posts from this blog

How to Read CE Marking on Motorcycle Riding Gears?

A lot of us aware there are safety certifications for helmet like SIRIM and ECE, but do you know there are for other riding gears as well?  They can be subdivided to 4 main categories which is Protectors, Motorcycle Apparels (Jacket, Pants or Suit), Motorcycle Gloves and Motorcycle Boots. We all rely on the rating to understand the protection level of the protective equipment, but do you know how to interpret them? So, we start with the CE marking, it is a French abbreviation   for “European Conformity” which is a universally accepted Safety Standard for Motorcycle Riding Gears across the world. If the equipment is CE approved, at least we know that it already achieved the minimum standard to protect us. By the way, please beware that fake or knock-off protectors and motorcycle apparels also can create the same marking to confused you, so please get from the appropriate source and understand how to differentiate them. Protectors So for protectors a.k.a. a...

4 Steps Guide to Get the Best Helmet FIT

  Step-1 Check The Manufacturer Sizing Chart You can try the size from size S to XL but it will take longer time. The smarter way is check the size at manufacturer sizing chart. If you size fall between two sizes, take the bigger size. After you got the size, you hereby narrow down the sizing to the size and one size up. Eg. If you got size M from the sizing chart, you can try size M and L for fitting. Find out the helmet fit is Long Oval, Intermediate Oval or Round shape head. Normally for Asian is under Round group, you can find the roundness of your head to determine which group are you fall into. Step-2        Fitting Check-List  1.  A new helmet should be snug around any part of your head that would be covered by a cap. This area should be about as firm as a tight inner cap, slightly compressed, but not painful or squeezing.  2.  There should be no pressure points in the cap area w...

How To Maintain Your Motorcycle Jacket and Pants Like a Pro

 Maintain a good cleanliness of your motorcycle garments will not only let you looks great, but also improve their longevity and performance, and it will eventually summed up   to a more comfortable ride and long term cost-saving. For Goretex Garment, DWR (Durable Water Repellent) is a external coating on the garment that able to beads water like car cystal coating.   Regular cleaning and reactivation of DWR will also prevent the garment become heavy when soaked with rainwater and breathability being paralyzed, making your Goretex Garment like cheap rain suit.  Bear in mind , manufacturer will also require the user to maintain the gear for honoring the lifetime waterproof warranty claim if any.    Textile Garments Cleaning 1.        Read manufacturer label inside the jacket/pants   for special instructions. 2.        Remove all amours (shoulder, elbow, back,...